Create a sixteen-segment flat ring and project UVs from above. Use the center as the scaling pivot and inspect orientation, UVs and dimensions before FBX export.
Create a sixteen-segment flat ring and project UVs from above. Use the center as the scaling pivot and inspect orientation, UVs and dimensions before FBX export.

VFX production guide index

The mesh and dimensions

In a fresh Blender scene, build a flat ring on the XY plane with inner radius 1 and outer radius 1.2. Sixteen segments form sixteen quad faces, normally 32 triangles. This is a thin band for effects such as a ground shockwave. Match units to the project and first reproduce these proportions.

1. Make the band from a circle

  1. Place the 3D Cursor at the intended center. Add Mesh → Circle with 16 vertices, radius 1 and Fill Type Nothing.
    Recheck facing, origin and scale after export
    Recheck facing, origin and scale after export
  2. In Edit Mode select the loop. Press E to extrude, cancel the translation with right-click/Esc, then scale the new loop by 1.2.
    Recheck facing, origin and scale after export
    Recheck facing, origin and scale after export
  3. Confirm sixteen faces connect the loops. Canceling the extrusion movement is different from undoing the extrusion.
    Recheck facing, origin and scale after export
    Recheck facing, origin and scale after export
  4. Inspect face orientation. Flip normals when needed so the intended camera sees the front faces.
    Recheck facing, origin and scale after export
    Recheck facing, origin and scale after export

2. Project UVs for a concentric image

For this example, project a concentric image onto the ring from above. Select the ring, enter Edit Mode and select all faces. Switch to orthographic top view, then choose U → Project from View (Bounds). In UV Editor, apply a numbered checker and look for stretched numbers. UVs determine which part of the image appears at each point on the mesh.

Circumferential scrolling may need a different unwrap: a radial seam with U around the ring and V across it. Do not assume a basic Unwrap automatically produces a straight rectangular strip.

Recheck facing, origin and scale after export
Recheck facing, origin and scale after export

3. Inspect the pivot and export copy

The pivot is the center for rotation and scaling. Keep it at the ring center for an expanding shockwave. Inspect Object Mode rotation and scale; if needed, use Ctrl+A → Rotation & Scale on an export copy. Check that Scale becomes one without changing the visible size. Leave Location alone unless you intend to change how the pivot is handled.

If modifiers are involved, decide whether export includes evaluated geometry. Even when using two-sided rendering, inspect the original face direction.

Recheck facing, origin and scale after export
Recheck facing, origin and scale after export

4. Export FBX and check the engine import

  1. Select only the intended mesh; inspect Selected Objects and mesh export settings in File → Export → FBX.
    Recheck facing, origin and scale after export
    Recheck facing, origin and scale after export
  2. Match axes and units to the importer. Compare a known size/orientation rather than prescribing one Forward/Up setting for every engine.
    Recheck facing, origin and scale after export
    Recheck facing, origin and scale after export
  3. Inspect pivot, UVs, face direction and imported vertex/triangle counts in Unity/Unreal.
    Recheck facing, origin and scale after export
    Recheck facing, origin and scale after export
  4. Rebuild the engine material, apply the mask and test scaling/rotation/fading. Do not assume complete transfer of Blender node materials.
    Recheck facing, origin and scale after export
    Recheck facing, origin and scale after export

References